Analisis Inovasi Teknologi dalam Pengurangan Sampah Plastik
Inovasi Material (Bioplastik & Polimer Alternatif)
Keywords:
Waste, Recycling, Plastic Waste, ProcessingAbstract
The issue of plastic waste has become a global concern due to the serious environmental implications of plastic's difficulty in breaking down naturally. If not managed properly, accumulated plastic can contaminate soil, water, and air. Addressing this issue requires innovative approaches for more efficient, effective, and sustainable waste processing and recycling. Technologies such as automated sorting, chemical recycling, and converting plastic into fuel or construction materials offer solutions that reduce reliance on raw materials and minimize waste. However, technology alone is insufficient. Public participation and government policy support are essential to establishing an integrated waste management system. Continuous promotion of education and public awareness about the importance of sorting and recycling is necessary. A more holistic approach to plastic waste management requires collaboration between technological innovation, active community involvement, and supportive regulations. This approach not only protects the environment but also creates economic opportunities through the recycling industry and the circular economy. Innovation in waste processing is a key strategy for sustainable development.
References
W. Elna, Surahma Asti Mulasari, and Sulistyawati Sulistyawati, “Literature Review: Optimalisasi Pengolahan Sampah OrganikMelalui Inovasi Terbaru Dalam Pengelolaan Sampah Organik,” J. Ilmu Kedokt. dan Kesehat. Malayati, vol. 12, no. 2, pp. 312–323, 2025.
B. Budiman, Y. Yuliyani, Azra Batrisyia Sabrina, M. Maharani, Isnaini Rahmah Lubis, and Dea Indriani, “Inovasi Ecobrick Sebagai Upaya Pengurangan Sampah Plastik,” J. Kolaborasi dan Inov. IPTEKS, vol. 2, no. 5, pp. 1579–1589, 2024, doi: 10.59407/jpki2.v2i5.1398.
E. Kamsiati, S. Rejeki, L. Marlina, A. Rusdin, and M. Su, “Nusantara Technology and Engineering Review Pertanian sebagai Solusi Pengurangan Sampah Plastik : Tinjauan Literatur Sistematis,” J. Unusida, pp. 44–53, 2024.
R. Muhfidin, S. N. Sari, and R. Prastowo, “Analisis Kapasitas Mesin Pencacah Limbah Plastik dan Tekstil Menggunakan Unit Penghancur (Shredder),” G-Tech J. Teknol. Terap., vol. 8, no. 3, pp. 1474–1483, 2024, doi: 10.33379/gtech.v8i3.4400.
W. D. Prayatna, N. A. P. Dewi, and I. K. S. Arsa, “Analisis Produk Origami Bottle Karya Smart Living Dalam Konservasi Lingkungan Melalui Rekayasa Teknologi Berkelanjutan,” Pros. Bali Dwipantara Waskita Semin. …, pp. 1–8, 2024.
M. Taswin, R. Yusuf, A. Haslinah, and H. Nainggolan, “Analisis Bibliometrik terhadap Efektivitas Teknologi Daur Ulang dalam Pengelolaan Limbah dan Pengurangan Pencemaran Lingkungan,” J. Multidisiplin West Sci., vol. 2, no. 11, pp. 983–994, 2023, doi: 10.58812/jmws.v2i11.782.
A. C. Febriyanti, I. N. Pratama, and A. K. Putra, “Pengembangan teknik daur ulang plastik untuk mengurangi pencemaran limbah plastik,” J. Environ. Policy Technol., vol. 1, no. 2, pp. 9–10, 2023.
G. Yusvita, I. Rinjani, L. Arum Suminar, E. Resa Andira, W. Wahyudin, and R. Puspa Sari, “Analisis Usaha Tote Bag Ramah Lingkungan sebagai Solusi Guna Mengurangi Sampah Plastik,” Go-Integratif J. Tek. Sist. dan Ind., vol. 2, no. 01 SE-Artikel, pp. 12–23, May 2021, doi: 10.35261/gijtsi.v2i01.5254.
K. D. Yuliesti, “Strategi Pengembangan Pengelolaan Rantai Pasok Dalam Pengolahan Sampah Plastik,” J. Ilmu Lingkung., vol. 18, no. 1, pp. 126–132, 2020, doi: 10.14710/jil.18.1.126-132.
T. Lestari et al., “Inovasi Pengolahan Sampah Plastik,” J. Pros. Sendi U, pp. 978–979, 2019.
